Kids swimming Armbands with "PANDAS” Print - 11-30 kg
Ref :
8500142
Key feature
Inflatable armbands composed of two inflation chambers with check valves. Ideal for kids discovering the water under constant adult supervision.
Products benefits
Helps to develop motor skills
Total freedom in the legs for their first movements in the water

Buoyancy aid
Certified 25 newtons EN 13138-1 with reinforced buoyancy at 30 newtons.

Compact design
Once deflated, the armbands easily fit into a bag

Stability
Two independent inflatable chambers of the same size on each armband.

Easy dressing
Inflate one chamber, put the armband on the upper arm and inflate the other.
Features
COMPOSITION
Main fabric : 100.0% Polyvinyl Chloride
Approved by
from independent laboratories
Tests
Buoyancy aid standard for learning to swim EN13138-1 Nabaiji armbands have a higher volume of buoyancy than the standard (30 newtons for a standard of 25 newtons)
Guarantee
2 years
Advice
Storage Tips
Rinse with clear water, allow to dry in the open air, and store away from natural light in a dry, well-ventilated place.
RESTRICTED USE
To be used under constant adult supervision
ADDITIONAL INFORMATION
Learning to Swim encourages the psycho-motor development of young kids.
Nabaiji offers 3 Learning to Swim experiences: Discovering the water, Discovering swimming and Discovering underwater. Appropriate products are offered for each experience.
The Armbands are part of the "Discovering the water" experience.
Very good buoyancy in the arms allows the kid to keep his head above water. He gradually gains confidence during his aquatic discovery. He moves in the water in a fairly upright position by kicking his legs.
Product weight
Approximately 150 g per pair
How does the valve work?
Our armbands have PVC one-way inflation valves.
To inflate the armbands correctly, press the base of the valve to open it.
The valve closes mechanically in about two seconds. As such, it is normal for a bit of air to escape after inflation. This is why you must close the cap quickly.
What should I do if the armbands deflate while I'm inflating it?
There could be a valve malfunction. The valve is not closing properly and too much air is escaping before the cap is closed. To replace it correctly, pinch the valve 2 or 3 times with your fingers, then inflate the product to the maximum and close the cap. The flap should reposition itself correctly.
Recommendation to avoid premature discolouration
After using them, rinse your armbands. Do not leave them in direct sunlight.
Users reviews
4.55 / 5
2332 ratings
2197 users recommended this product
-
KoustavMan40-49 years old20 September 2019Use since 1 week or lessThat review has been deposited on this product versionCan't inflate
Got this from decathlon but there is no way I can understand how to inflate them can anyone help
Brand response :Dear Koustav,
We are sorry for late reply to your comment. There is a valve in each of them which need to be pulled out first. After when the armbands are fully inflated you lock and push these valve inside again to avoid any skin abrasions. The valve is visible on picture number 4. In case of any issues, please contact Decathlon on provided email.
Regards,
Kornel - Water Sports Commercial Leader
-
Michael26 February 2019Use since 3 to 6 monthsI recommendThat review has been deposited on this product versionapi.label.reviewFlag.checkedPurchase.titleGreat piece of kit
Great grandchildren
-
Michael26 February 2019Use since 3 to 6 monthsI recommendThat review has been deposited on this product versionapi.label.reviewFlag.checkedPurchase.titleGreat piece of kit
Good for grandchildren
* The prices listed on the site are the prices recommended by DECATHLON SA's central purchasing department.